Inspection Engineer Shell - Shell Jurong Island

Job description

• Act as NDT (Non Destructive Test) focal point to Shell Jurong Island staff on matters pertaining to, but not limited to NDT techniques, Interpretation of codes, standards, and specifications related to acceptance criteria and Inspection requirements.
• Develop and manage site NDT (Non Destructive Test) programs, including but not limited to qualifications of NDT vendors, ensuring proper execution of NDT, management of NDT contracts.
• Provide inspection technical assurance for development and execution of projects for static assets (column, vessel, tank, heat exchanger, reactor, furnace, piping, pipeline etc).
• Ensure compliance with applicable DEP and other internationally accepted codes and standards.
• Develop and execute QA/QC framework for relevant project activities, including but not limited to attending kick off / Pre Inspection Meetings, vendor qualification assessment and audits, review of drawings & QA/QC documents, attending shop inspection activities, and site installation.
• Provide feedback to relevant Category Managers on Engineering Procurement and Construction Management (EPCm) vendors quality performance.
• Coordinate with specialists (Projects &Technology, etc.) and consultants as and when is required.

Requirements

• Degree in Mechanical Engineering
• ASNT Level III in MT/PT/RT/UT/ET
• Must be knowledgeable in Tube inspection techniques.
• Minimum of 5 years experience in the NDT activities as ASNT Level III.
• Minimum of 3 years experience in the fabrication related activities
• Certified AWS-CWI
• Good understanding of HSE Management System and Risk Assessment methodology.
• Well versed in internationally accepted codes, standards, and practices.
• Good understanding of degradation mechanisms affecting the equipment in the Oil & Petrochemical industries

Maintenance Technician (GMP) JLL - Singapore, SG

Job Description SUMMARY OF POSITION

Under general supervision, this position has a strong focus on maintaining, troubleshooting and repairing critical process equipment on all systems.  A very high percentage of “wrench time” is expected.  Individual is expected to demonstrate technical expertise in maintenance & troubleshooting and be multi-skilled in other areas (pipe fitting/plumbing, electrical, automation and mechanical) in order to successfully complete daily/weekly work assignments.  The individual in this role must be available for Call-in work and to perform other duties as required. The candidate must possess the ability to diagnose and repair equipment without the use of third party vendors.  Prior experience working in a regulated manufacturing environment under cGMP’s would be desired.


Major Activities And Responsiblities
 

Install, operate, maintain, troubleshoot and repair process equipment such as rotating equipment, agitators, blenders, mixers, peristaltic pumps, filtration carts, bioreactors, glass washers, autoclaves, chromatography skids, column skids, drying ovens, incubators, drum inverters, inactivation tanks, and harvest clarifiers.

 Should have experience changing out wear parts such as diaphragm gaskets and O rings on production equipment.

Operate efficiently, all equipment used by this trade and maintain in good condition.  Inspect and service equipment according to schedule, lubricate maintain and adjust as required.

Ensures that all appropriate repairs and maintenance data is captured on work orders.

Review and analyzing system data reliability in developing initial recommendation with System Engineer on any maintenance changes, upgrades, replacements, etc.

Maintain up to date & complete system documentation in a change control maintenance system (CCMS) for all repairs or changes to the system.

Monitor the operation of process equipment, support systems, and other mechanical and electrical equipment; record readings and make adjustments where necessary to assure proper operation of equipment. Requires the ability to analyze the operation of various systems, determine the cause of any problems/malfunctions and take corrective action as required.

Performs preventive maintenance on all critical system equipment which includes but not limited to: assembling all tools, supplies and instruments necessary to complete the job, performing work with a minimum amount disruption, conducting immediate clean-up of work area, completing the preventive task sheet, returning tools to workshop, and unused supplies to store room, reporting any equipment problems, impending supply or material shortages to the System Engineer.

Install and repairs to plumbing/piping/tubing; install and rebuilds heat exchanger; replace seals/gaskets on pumps; install and repair piping, valves, filters, and associated controls; Installs, repairs, and maintains electrical controls, switching and motor controls, wire single phase and three phase motors (under the direction of the Site Electricians). Assist other mechanics and operators with major repairs and maintenance of building and process support equipment.

Maintains tools and orders supplies as required for installation and repairs.

Complies with departmental policy for the safe storage, usage and disposal of hazardous materials.

Cross train as back up, or others, as appropriate to the advanced level.

Maintains a clean and safe workspace.

Background Requirements

Education:

• High School graduate or equivalent.
• Vocation or technical school certification.
• Boiler license is a plus.

Experience:

• 5-7 years apprenticeship or equivalent experience in mechanical or associated tasks.
• Experience working in a regulated manufacturing environment under cGMP’s or ISO 9000

Skills:
 

• Must have adequate skills to perform required job functions with minimal supervision.
• Must be proficient in computer skills and software such as MS office, Word, Excel, CCMS.
• Good written and verbal skills.
  

About this company

JLL (NYSE: JLL) is a professional services,project management and investment management firm offering specialized real estate services to clients seeking increased value by owning, occupying and investing in real estate. With annual fee revenue of $4 billion, JLL has more than 200 corporate offices and operates in 75 countries worldwide. On behalf of its clients, the firm provides management and real estate outsourcing services for a property portfolio of 3 billion square feet and completed $99 billion in sales, acquisitions and finance transactions in 2013. Its investment management business, LaSalle Investment Management, has $48.0 billion of real estate assets under management. JLL is the brand name of Jones Lang LaSalle Incorporated. For further information, visit www.jll.com.

Sales Executive HYDROBALL TECHNICS (SEA) PTE LTD - Singapore, SG

Hydroball Technics has successfully developed a Non-Powered Auto Tube Cleaning System for heat exchangers and condenser with R& D ingenuity and sound engineering design that covers every potential reduction in kilowatt consumption centered on defined Energy Milestone chart. Transformation process of installed utilities from conventional types to “state-of-the-art design” was given 100% management support. The revolutionary Hydroball System not only eliminates equipment downtime but also optimizes energy consumption of equipment by automatically keeping the heat exchanger tubes perpetually free from fouling and scaling. Our test results show that all chillers in central air-con systems equipped with Hydroball System have trouble free operation with the full

support from the local distributor.Hydroball Technics has worldwide patent rights and has appointed Hydroball Technics (SEA) Pte Ltd as the manufacturer and distributor.

HBTS Could Improve Business Cost By
> Reducing the air-con electricity bill by 10% – 20%

> Cutting down water consumption and wastage of water

> Lessening the use of pollutive chemicals and biocides

> Lowering air-con maintenance costs

> Lengthening the life span of heat exchangers and condenser systems

The Role
Sales Executive with ACMV or HVAC. Sales of Equipment / Device / Systems / parts and supply experiences to commercial building or factory or construction industry , with personal sales leads and market contacts. With 3 years experience. Able to speak English & Chinese is preferred (Liaise with Chinese clients).

Keen please write to cv@hbt.com.sg with photographs. Singaporean only. www.hbt.com.sg

Wechat : petersoh_sg

Skype ID : petersohs

Whatsapp : +6582220033
 

About this company

The world first non-powered automatic chillers (heat exchangers) shell tubes cleaning system with patents in more than 20 countries

Associate Engineer / Senior Associate Engineer (CMT), Facilities Engineering (Tampines) GLOBALFOUNDRIES - Singapore, SG

Job Purpose

• Assist Sr Engineer to carry out Facilities plant maintenance including troubleshooting, corrective, breakdown and ad-hoc maintenance. Ensure all Facilities systems are operating with minimum downtime and zero incident

Responsibilities

• Carry out Preventive Maintenance for Mechanical, Electrical, UPW, WWTP, STP, Burn Box, Abatement exhaust ducting systems and Burn Box logging
• Supervise and coordinate work with vendors on Preventive Maintenance, Corrective Maintenance, Breakdown Maintenance and Ad-hoc Maintenance
• Assist Sr Engineer on Mechanical, Electrical, UPW, WWTP and STP system trouble shooting such as Fire alarm and protection system, VSD, UPS, Emergency genset, process exhaust system etc
• Provide assistance to Sr Engineer in general mechanical repair works such as motors, pumps bearing replacement, pumps mechanical seal replacement, heat exchanger cleaning, pump overhaul etc
• Assist Sr Engineer in general electrical repair work such as Motor Manager, Feeder Manager, FFU, PS4, MCCB replacement, VSD capacitors, cooling fans replacement etc
• Assist Sr Engineer in UPW, WWTP, STP repair works such as RO pump, reclaim pump, loop pump, sump pump, diaphragm pump bearing replacement etc
• Assist Sr Engineer in Electrical predictive maintenance work such as IR Thermal scanning
• Assist Sr Engineer in Corrosion control program such as piping thickness monitoring, corroded piping replacement, painting of piping and equipment structure in cooling tower, scrubber yard, roof top area
• Specialize in one of the M & E, UPW, WWTP, STP systems to improve, enhance PM activities and provide suggestion on system design
• Assist Sr Engineer in Mechanical predictive maintenance work such as vibration monitoring
• Attend all schedule training for GLOBALFOUNDRIES compulsory courses and in-house training conduct by vendors
• Participate in weekly meeting for job planning, outstanding works/issues discussion and share knowledge and group discussion on resolving issues or incident
• Prepare daily Permit to Work and verify on site and ensure good housekeeping before and after maintenance works
• Ensure safety regulations are complied

Requirements

• Degree in Mechanical / Electrical & Controls / Chemical Engineering
• At least 2 years of work experience on M & E or UPW system
• Hands-on working skills on M&E or UPW system e.g. troubleshooting skills
• Diploma holders with more years of relevant experience in a similar capacity will be considered
• Good interpersonal and communications skills
• Team Player
• Positive attitude and desire to learn

About this company

GLOBALFOUNDRIES is the world’s first full-service semiconductor foundry with a truly global footprint. Launched in March 2009, the company has quickly achieved scale as the second largest foundry in the world, providing a unique combination of advanced technology and manufacturing to more than 160 customers. With operations in Singapore, Germany and the United States, GLOBALFOUNDRIES is the only foundry that offers the flexibility and security of manufacturing centers spanning three continents. The company’s three 300mm fabs and five 200mm fabs provide the full range of process technologies from mainstream to the leading edge. This global manufacturing footprint is supported by major facilities for research, development and design enablement located near hubs of semiconductor activity in the United States, Europe and Asia. GLOBALFOUNDRIES is owned by the Mubadala Development Company.

For more information on GLOBALFOUNDRIES, visit www.globalfoundries.com

GLOBALFOUNDRIES is an Equal Employment Opportunity/Affirmative Action (EEO/AA) employer Minorities/Female/Disabled/Veteran (M/F/D/V).#CB

Chemical Process Engineer for Singapore S'Pass Chakara Immigration Consultancy - Singapore, SG

Prepare process flow diagram (PFD),mass balance, line sizing,PID,UFD,block flow diagram.
Design / Sizing of process equipment(e.g column,exchanger,vessel,pump) and preparation of equipment sheets.
Design relief systems, alarm/interlock matrix, and functional description
Prepare control philosophy, preliminary operating instructions.
Participate in technical meeting with customer.
Prepare process guarantees for the plant.
Participate in hazop analysis or other safety reviews.
Startup, commissioning and trouble-shooting of plants, data collection, validation.
Any other work as required by the management. B.E./B.Tech(Chemical) Degree in Chemical Engineering as minimum, or equivalent.
Minimum 3 years process design or plant experience
Proficiency in process simulation software(eg.Pro-II/Aspen plus / Hysis / chemcad),heat exchanger design software(eg.HTFS / HTRI ) will be added advantage.
Sound knowledge in process control and instrumentation.
Familiar with unit operations in process plants and sound technical knowledge in heat and mass transfer.
Knowledge in polymer process and experience in plant start-up and commissioning experience will be an advantage.
Willing to travel and interact with customers in Asia Pacific region for sales support project execution, plant start up.

About this company

Chakara Engineers is a technically competent team in design, supply, installation, testing commissioning of systems in the field of Fire Protection System Utility Piping (chiller, Hot water, ETPetc.)